scuby
Got my first EA82!
Cut The Flesh & Make It Bleed. Fresh Skin Is What I Need
Posts: 89
|
Post by scuby on Aug 22, 2007 12:43:43 GMT -5
is it possible to put an EG33 in a loyale?. I'm trying to make my loyale into a truck/winter beater/hauling vehicle
so far my loyale needs bigger power prefer 6 cylinder.
needs to be heavier and needs beastly tires.
tires like um mm. 215/75 R15 bf Goodrich all terrain. but i need to find 15" 5X100mm bolt rims know of any vehicle that has 15" on that pattern?
Subex/Scuby
|
|
|
|
Post by 86bratman on Aug 22, 2007 14:22:54 GMT -5
Dodge minivans, chevy calalier, and the newer dodge neons use 5x100, just off the top of my head...
And the weight, and length of the eg33 would be a complete pain in the ass for putting it in a 4 cyl body. I'd personally go with the ej25, and install the updated hg's while its out of the car.
|
|
scuby
Got my first EA82!
Cut The Flesh & Make It Bleed. Fresh Skin Is What I Need
Posts: 89
|
Post by scuby on Aug 22, 2007 14:41:49 GMT -5
hg's?
|
|
|
|
Post by bucky92 on Aug 22, 2007 14:48:47 GMT -5
|
|
scuby
Got my first EA82!
Cut The Flesh & Make It Bleed. Fresh Skin Is What I Need
Posts: 89
|
Post by scuby on Aug 22, 2007 14:51:05 GMT -5
aww
|
|
|
|
Post by jeffast on Aug 22, 2007 19:36:33 GMT -5
go for the eg33, you would have to re mount the raditor, but i think it would fit
|
|
Huck
Administrator 
Dr. FrankenWedge
Subie Addict
Posts: 288
|
Post by Huck on Aug 23, 2007 6:10:09 GMT -5
I don't think an EG33 will fit without cutting out the radiator support all together, as even in the XT6 body, the EG33's front pulley "Barely" fits behind the radiator support...a EJ22, or25 (or even a EJ18) would be a bettter swap
|
|
