scuby
Got my first EA82!
Cut The Flesh & Make It Bleed. Fresh Skin Is What I Need
Posts: 89
|
Post by scuby on Aug 23, 2007 17:52:52 GMT -5
i have a Manuel Transmission from an 88 xt6. don't know what to ask for it. but will trade for a turbo Tranny for a loyal must be Automatic. also need xt6 front axles.
|
|
|
|
Post by 86bratman on Aug 24, 2007 22:27:20 GMT -5
Where are you located. And how much would you want straight out?
Are you looking for a 4wd or 2wd loyale tranny?
|
|
|
|
Post by caboobaroo on Aug 26, 2007 1:26:09 GMT -5
3AT or 4EAT auto?
Details are important to people who are intereted and since the EA82Ts came with both autos, better know which one you need.
|
|
scuby
Got my first EA82!
Cut The Flesh & Make It Bleed. Fresh Skin Is What I Need
Posts: 89
|
Post by scuby on Aug 26, 2007 16:43:44 GMT -5
prefer 4eat but 3 would be ok
|
|
scuby
Got my first EA82!
Cut The Flesh & Make It Bleed. Fresh Skin Is What I Need
Posts: 89
|
Post by scuby on Aug 26, 2007 16:45:18 GMT -5
Details:
3 or 4spd Turbo Automatic
For 1985 gl to a 1994 loyal
|
|
|
|
Post by 86bratman on Aug 26, 2007 17:10:03 GMT -5
3at's are still 23 spline IIRC, and to swap in a 4eat you've need the wiring and tcu... If I were you I'd just do a ft4wd manual.
|
|
scuby
Got my first EA82!
Cut The Flesh & Make It Bleed. Fresh Skin Is What I Need
Posts: 89
|
Post by scuby on Aug 26, 2007 19:34:15 GMT -5
last time i knew turbo trannys have 25 spline. and non turbo has 23 spline
|
|
|
|
Post by Turbone on Aug 26, 2007 23:56:49 GMT -5
AT turbos were 23 spline.
|
|
scuby
Got my first EA82!
Cut The Flesh & Make It Bleed. Fresh Skin Is What I Need
Posts: 89
|
Post by scuby on Aug 27, 2007 6:32:56 GMT -5
i dont know then. i need to have 25 slin in my loyale. to finish 5 lug converstion
|
|
|
|
Post by 86bratman on Aug 27, 2007 9:45:02 GMT -5
Use fwd impreza axles. 23 spline tranny side, same on the hub end. You can match up the doj cups from a 23 spline axle of the same size as the xt6 doj cup and switch them out, then you will have 23 spline xt6 axles...
|
|
scuby
Got my first EA82!
Cut The Flesh & Make It Bleed. Fresh Skin Is What I Need
Posts: 89
|
Post by scuby on Aug 27, 2007 10:13:53 GMT -5
i need 23spline tranny side and xt6 small big nut end. for my loyale. without axles seperation
|
|
|
|
Post by 86bratman on Aug 27, 2007 20:38:16 GMT -5
There isn't really any major seperation to swapping doj cups. Remove the cup side of the inner boot, remove circlip holding the cup on, slide off cup. Grease and slide on 23 spline doj cup, reinstall circlip, reinstall boot with new clamp.
|
|
scuby
Got my first EA82!
Cut The Flesh & Make It Bleed. Fresh Skin Is What I Need
Posts: 89
|
Post by scuby on Aug 28, 2007 6:04:15 GMT -5
aggghhhhh!!!! Brain hurts
|
|
|
|
Post by 86bratman on Aug 28, 2007 20:56:07 GMT -5
If you wanna ship me two xt6 axles, i'll do the hard work and ship them back for the price of a case of beer and shipping...
|
|
scuby
Got my first EA82!
Cut The Flesh & Make It Bleed. Fresh Skin Is What I Need
Posts: 89
|
Post by scuby on Sept 12, 2007 6:58:37 GMT -5
not possible i dont buy Alcholic Bevrages. (me send 2 axles and case of beer?)
|
|
