zukiru
Got my first EA82!
On the DL
Posts: 70
|
Post by zukiru on Apr 20, 2008 1:24:35 GMT -5
maybe? maybe I need to reset the timing. (more likely an air leak I think)
when I pull the throttle cable I hear what sounds like a busted diaphragm in something.
I know the egr soleniod is broken but I thought I had it bypassed.
can FPR cause part throttle surging?
also going to check the Vac adv in the morning.
|
|
zukiru
Got my first EA82!
On the DL
Posts: 70
|
Post by zukiru on Apr 20, 2008 1:42:34 GMT -5
oh no codes
|
|
zukiru
Got my first EA82!
On the DL
Posts: 70
|
Post by zukiru on Apr 20, 2008 2:12:22 GMT -5
here I am talking to myself again
really not wanting this to be intake gaskets... but with steam near there........ err
If I am doing intake gaskets Iam going to go get the (RADIO EDIT) spider intake at the pick and pull. (edit) crap ... it's 15 bucks...... those gaskets are good as done!
|
|
|
Post by bucky92 on Apr 20, 2008 4:59:41 GMT -5
Drew ..you reminded me I have to redo the Intake gasket on Rocks motor before it either goes into storage or is sold..Its seeping again ( This is the one that let me sit in PA..Hocrest modified an old one to work)
|
|
zukiru
Got my first EA82!
On the DL
Posts: 70
|
Post by zukiru on Apr 20, 2008 10:27:41 GMT -5
well good at least i helped somebody
(are the gaskets hard to do?)
|
|
|
Post by bucky92 on Apr 20, 2008 10:35:45 GMT -5
well good at least i helped somebody (are the gaskets hard to do?) Not too bad..on the XT6..hard part is trying to keep the coolant from running down and hydrolocking the motor ( But its way cool when you get it out..shooting across the street. We didnt take the intake completely of..just loosened it enough to work with it.
|
|
zukiru
Got my first EA82!
On the DL
Posts: 70
|
Post by zukiru on Apr 20, 2008 23:44:53 GMT -5
I figured if a sensor like the CTS had a bad connection then I'd get the ECI light...
anyway the harness is corroded and has no clip.
:roll:
|
|
zukiru
Got my first EA82!
On the DL
Posts: 70
|
Post by zukiru on Apr 21, 2008 10:21:04 GMT -5
that was it...... no more surging !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
|
|