|
Post by joostvdw on May 29, 2008 10:36:27 GMT -5
I was going to post this on the normal board, but since that's down and most people instantly migrated here I'll post it here. I ordered a fel-pro headgasketset and a exedy clutch kit, I took some pictures of the stuff so hopefully you guys can verify that I got the right parts and what I'm still missing. These are the gaskets I can identify and the ones I think need. These are what's left, I don't think I need them, correct me if do. This is the clutch kit with new pressure plate, looks like stock to me, but the clutchdisc seems to be exedy. And for phil The things I still need for a full engine reseal are oil pan gasket, those metal reinforced O-rings and crankseals. Correct?
|
|
zukiru
Got my first EA82!
On the DL
Posts: 70
|
Post by zukiru on May 29, 2008 10:46:44 GMT -5
nice kit.. I'm not sure what most of those are. (I recognize the head, turbo, and t-stat stuff)
I don't see the mickey mouse gasket that goes on the oil pump, though..
|
|
|
Post by joostvdw on May 29, 2008 11:03:17 GMT -5
I've already bought all the seals (including the mickey mouse seal) for the oil pump a while ago, so that's also sorted Something I just thought of, should I replace the oil and or waterpump? The odo just rolled over to 150k kms, so that's not all that high, but since I have virtually no history on this car, it may be worth it. I'm doing all this work now to be able to get some more miles out of it AND because my XT turns 20 on 16th of june!
|
|
|
Post by kingbobdole on May 29, 2008 21:41:16 GMT -5
On your "extras" the top left is the oil filler tube. Lower left is the T stat as well... I think the brass one is for the EGR.. Looks like fun. Do the water pump... for the oil pump you need 3 seals. O ring, mickey and the shaft seal. If you have the money, get a whole new pump... not a bad idea if you plan to keep the car. If you don't replace it, just get the seals... no worries.
|
|